SHENZHEN XINGJIA XINYUAN ELECTRONICS CO.,LTD
To get the best with our best !
Add to Cart
IP67 LED Driver Thin 24V 150W 6.25A Wash Wall Light Strips Light Box Power Supply
IP67 Waterproof LED Driver ultra thin 24V 150W 6.25A wall light box signboard light module
Quick Detail:
Description:
All these products adopt PWM high-frequency pulse width modulation technology, mature standardized production, strict 100% load-carrying aging, high and low voltage impact experiments and complete test records for development & production of LED driver through strictly quality control system and highly responsible attitude, thus have a good quality feedback during application.
Specifications:
| Series | Name | LED Driver |
| 1 | Basic info | 24V 6.25A 150W |
| 2 | Model | JL-150W-24V-WS |
| 3 | Material | Aluminum |
| 4 | Efficiency | 85% |
| 5 | Rated input | 220VAC 50/60Hz |
| 6 | Voltage Range | 100~220V |
| 7 | Output Voltage | DC24V±5% |
| 8 | Output Current | 6.25A |
| 9 | Output Power | 150W |
| 10 | Grade | IP67 |
| 12 | Protect | Shortage/Overload |
| 13 | Dimension | 19.0*5.2*1.9CM |
| 14 | Weight | 460g |
Related models list as below:
Waterproof series for line light, signboard light and lamp house:
| Series | Input Voltage | Output Value | Size/mm | Weight/g |
| 12V/24V | 100~220V | 20W | 182*30*20 | 200 |
| 12V/24V | 100~220V | 30W | 222*30*20 | 260 |
| 12V/24V | 100~220V | 40W | 222*30*20 | 260 |
| 12V/24V | 100~220V | 50W | 202*35*24 | 280 |
| 12V/24V | 100~220V | 60W | 202*35*24 | 280 |
| 12V/24V | 100~220V | 80W | 170*53*35 | 510 |
| 12V/24V | 220V | 100W | 182*62*20 | 360 |
| 12V/24V | 220V | 150W | 208*58*32 | 680 |
| 12V/24V | 220V | 200W | 238*58*32 | 810 |
| 12V/24V | 220V | 250W | 228*72*32 | 950 |
| 12V/24V | 220V | 300W | 228*72*32 | 950 |
| 12V/24V | 220V | 400W | 260*102*35 | 1820 |
| 12V/24V | 220V | 450W | 260*102*35 | 1900 |
| 12V/24V | 220V | 500W | 260*102*35 | 1900 |
| 12V/24V | 220V | 550W | 290*102*35 | 2200 |
| 12V/24V | 220V | 600W | 290*102*35 | 2200 |
Applications:
Widely used in LED Lighting, LED display, LED strips, LED advertisement screen, LED sign, LED night light, LED lamp house, LED decoration, LED wall light, LED street light , LED wall light, LED backlight, LED tube, offices , hospital , schools , factories , plants, shopping malls, supermarkets, kitchen, fair cabinet and so on.
Welcome to LED switch power supply, please read this instruction manual thoroughly before using the LED switching power supply:
Product usage considerations:
1. Input voltage should be within the specified voltage range (input voltage: 220VAC).
2. Prohibited to be used in the high temperature environment, power port is the thermal vents, wind 50CM range, please do not place other objects, make sure that the power should have good thermal dissipation space environment.
3. Power supply have built-in short circuit protection function, when output short circuit, the power will automatically enter the status. Power off after 1 minute and then power on.
4. For safety, properly grounded, the output power cable must be ≥2.5mm2
Installation method:
1. Strictly in accordance with the position indicated by the output terminals of the power supply. It must be firm, check the output line and prohibited to be reversed (input "220VAC" main line, output "+" loaded for positive cathode, output "-" load for negative cathode).
2. Before power, check that the line voltage is compatible with the operating voltage with multimeter (voltage: 220VAC) recognized before it can be closed.
3. Power firm installed vertically (vertically in a place easy to wire the power supply, cover to cover, to be water proof)
The overview of Switching power supply
Switching power supply is a device which use modern power electronics technology to control time ratio of switching tube open and off and maintain a stable output voltage of power supply, switching power supply is generally composed of IC and MOSFET which is controlled through pulse width modulation (PWM) compared with linear power. The cost of switching power supply increases with the increase of output power, but the growth rate is different. Linear power cost is higher than switching power supply at a certain output power point, which is called cost reversal point. With the development and innovation of power electronics technology and switching power supply technology constantly innovating, this cost reversal point is increasingly moving to low output power end, which provides a broad development space for switching power supply.
Switching power high-frequency is the direction of its development, high-frequency will make switching power miniaturization and make switching power into a wider range of applications, especially in the field of high-tech applications, promoting high-tech products miniaturization and portability. In addition, the development and application of switching power supply are of great significance in energy saving, resource saving and environmental protection.
The main power electronic devices used in switching power supply are diode, IGBT and MOSFET.
SCR has a small number of applications in switching power supply inputting rectifier circuit and soft start circuit, GTR is difficult to drive with low switching frequency and gradually replaced by IGBT and MOSFET.
Three conditions of switching power supply
1. Switching: power electronic devices work in the switching state rather than linear state
2. High frequency: power electronic devices work at high frequency rather than low frequency close to power frequency
3. DC: switching power supply output is DC rather than AC
-------------------------------------------------------------------------------------------